Toll Free: 1-866-508-6394
OR Contact Us
OR Contact Us
Shop by Category
CV Flange Yokes | ||||
| Series / Size | Pinion / Transfer Case | |||
| 9" Ford, 35-Spline | Atlas | GM 14-Bolt | ||
| 15 / 930 | -- | 39334 | -- | |
| 21 / 934 | 39332 | 39335 | -- | |
 | ||||
Pinion Yokes | ||||
| Series | Pinion / Transfer Case | |||
| 9" Ford, 35-Spline | Atlas | GM 14-Bolt | ||
| 1350 | 39011 (steel) 39911 (aluminum) | 39086 | 39085 | |
| 1410 | -- | 39087 | 39083 | |
| 1480 | 39072 (steel) 39972 (aluminum) | 39088 | 39084 | |
| ||||
About U-Joints | ||||
| Series / MW Part Number | Cap Diameter | Width | Recommended U-Bolt / Cap Kit | |
| 1350 - 39029 | 1.1875" | 3.625" | 39010 U-Bolts 39112 Cap Kit | |
| 1410 -- | 1.1875" | 4.1875" | 39010 U-Bolts 39112 Cap Kit | |
| 1480 - 39080 | 1.375" | 4.1875 | 39075 Cap Kit | |
** Note: MW does not recommend greasable u-joints because their hollow body decreases strength. | ||||
| ||||
For 1350 series, Four - 12mm Bolt Hole on 4.250" bolt circle.
1350 series, 2nd generation, steel cap kit for pinion yokes and rapid release transmission yokes (pr)
32 spline, for Atlas Transfer Case, 4.252" Diameter, Six - 10mm X 1.5mm Threaded Bolt Holes on 3.701" bolt circle. Fits Size 930 / Series 15 CV Joint
32 spline, for Atlas Transfer Case, 5.039" Diameter, Six - 12mm X 1.75MM Thread Holes on 4.252" bolt circle. Fits Size 934 / Series 21 CV Joint
32 spline, for 1350 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
32 spline, for 1410 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
32 spline, for 1480 series U joint, Atlas, GM NP203, GM NP205 transfer cases. "B"= 3.720"
M12-1.75 pitch x 30mm thread length, 6 point 14mm hex, (set of 4)
CV Flange, for Series 21 CV (940) type, For Ford 9" 35 spline pinion, 5.039" Diameter, Six -12mm X 1.75mm Thread pitch Bolt Hole on 4.252" bolt circle. 3.80" overall length. Made from high strength heat treated 4140 steel and black oxide coated.
29 spline, for 1410 series U joint. "B"= 3.720"
29 spline, for 1350 u-joint. "B"=3-1/32"
30 spline, for GM 14-Bolt, 5.438" Diameter, Four - 12mm Bolt Hole on 4.25" bolt circle