Toll Free: 1-866-508-6394
OR Contact Us
OR Contact Us
Shop by Category
MW's anti-roll assemblies feature splined 7075 aluminum outer arms. There are two models: 1-1/4" and 1-1/2" spline sizes. The shaft for the 1-1/4" series can be heavy wall 1-1/4" chromoly tube or splined tube adapter. The 1-1/2" spline size assemblies utilize the splined adapter with 3" x .083" wall 4130 tube. The splined arms eliminate the possibility of oblong holes, which are typical of a through bolt design. The arms have a clevis design and accept 3/8" rod ends. The 3" tubular bar is stiffer than the straight 1-1/4" bar, and has the advanatage of being fabricated to any width in the field. The spherial self-aligning aluminum and Delrin® bearing mount are supplied with the weld on tabs and are available separately.
5" arms with 16" of 3" tubing for 21-11/16" center to center of arms. Includes bearings.
6" arms with 16" of 3" tubing for 21-11/16" center to center of arms. Includes bearings.
Adjuster link for mono-shock rocker suspension assembly. (ea)
6" arms, with 24" of 3" tubing, and bearings
5" arm with 1-1/4" serration (ea)
5" arms, 18" center, 1-1/4" x .188" tube
6" arms, 18" center, 1-1/4" x .188" tube
Inlcudes tube ends, rod ends with 3/8" holes, and all nuts and washers
Includes rocker shaft, anti-roll assembly, adjuster link, bushings, and mounting hardware (Shock and coil over not included)
Aluminum housing, inner race, with weld-in tab, no serration (plain bore) (ea)
Aluminum housing, inner race, with weld-in tab, 1-1/2" serration (ea)
