MW and MasterLine axles with 1.564" I.D. bearings. For drag race use only.

C-Clip Eliminator Kit, 8.8 Stock Axles, 1.564" I.D. bearings with bushings

30 spline, for 1350 series u-joint, "B"= 3-9/32"

For all 3.150 O.D. bearings, includes 3/8" backing plate bolts and washers (pair)

MW 35 spline for 8.8" Ford

MW 35 spline, MasterLine for 8.8" Ford

Replacement cap, billet steel, 3.062 bore case (each)

3/8" diameter bolts with nuts and washers. Set of 8.

MW 35 spline, Lightweight for Ford 8.8

Drilled to match both O.E.M. and MW housing ends. (pair)

Includes shims and bearings for pinion and carrier, pinion seal, crush sleeve, ring gear bolts, pinion nut, cover gasket, gear marking compound, and brush

For Ford 8.8 (Mustang) brakes. Includes ball bearings, retainers, lock rings, and backing plate bolts.