Toll Free: 1-866-508-6394
OR Contact Us
OR Contact Us
Shop by Category
MW heavy-duty transmission yokes have been designed to incorporate Spicer® 1350 series U-joints and are forged from heat treated 4340 steel. All yokes are 100% machined in house on MW's state-of-the-art CNC machines. Special fixtures are used to guarantee that all machining is done in relationship to the spline pitch diameter. This assures concentricity and produces a yoke that is symmetrical and balanced for smooth operation. The yokes are then re-heat treated to over 200k PSI and U-joint cup bores are honed to exact limits and the bushing/seal surface is ground with special fixtures assuring concentricity with the spline pitch diameter. Like all MW product's they are laser engraved with part numbers and batch numbers that allow complete trace-ability. The end of spline sealing feature is an o-ring seal with a tapered retaining ring that forces an aluminum plug against the seal. This improved method has proven to eliminate fluid seepage.
Technical Information for Powerglide and Turbo 350 Splines Model Differences for 32-Spline Transmission Yokes
16 spline, for 1480 series U joint, for G-Force and Lenco transmissions, 1-3/8" diameter. "D"=4.50"
32 spline, for 1480 series U joint, for Lliberty and Jerico transmissions with roller/needle bearing tailhousings. "D"=6.50"
32 spline, for 1480 series U joint, for T-400 transmissions with roller/needle bearing tailhousings. "D"=6.145"
32 spline, for 1480 series U joint, for Series yoke for Lenco transmissions, 1-3/8"-32 splineb. "D" =4.50"
35 spline, for 1480 series U joint, for Series yoke for Lenco transmissions, 1-1/2" diameter35 spline. "D" =4.25"
32 spline, two splines omitted, for Jerico and G Force roller/needle bearing tailhousings, 1.888" diameter. "D"=6-7/16"
32 spline, for roller/needle bearing tailhousings, Jerico and NASCAR transmissions, 1.888" diameter. "D"=6-1/8"
16 spline, for 1350 series U joint, G-Force transmission. "D"=3-1/2"
16 spline, for 1350 series U joint, Lenco transmission, "D"=4"
32 spline, for 1350 series U joint, G-Force transmission. "D"=3-1/2"
35 spline, for 1350 series U joint, Lenco transmission, "D"=4"
26 spline, for 1350 series U joint. 904 Torqueflight transmissions. 1.559" diameter. "D"=6-1/8"
28 spline, for 1350 series U joint. Ford C-4 transmissions. 1.499" diameter. "D"=5-13/16"
32 spline, for 1350 series U joint, 1.886" diameter. "D"=5-3/4"
27 spline, for Dedenbear and Powerglide with roller/needle bearing tailhousing. 1.499" diameter. "D"= 5-13/16"
31 spline, for 1350 series U joint. Ford C-6 and Toploader transmissions, 1.6845" diameter. "D"=6-1/8"
32 spline, for Jerico, G Force, and NASCAR transmissions, 1.885" diameter. "D"=6-1/8"
32 spline, for 1350 series U joint, Lenco transmission, "D"=4"
30 spline, for roller/needle bearing tailhousings, Liberty transmission, 1.750" diameter. "D"= 6-1/8"
30 spline, for 1350 series U joint. 1.680" diameter. "D"= 6-1/8"
27 spline, for 1350 series U joint, 1.5035" diameter. "D" =5-13/16"
Rapid release, 32 spline, for Lenco transmission. "D"=4.00"
Rapid release, 16 spline, for Lenco transmission. "D"=4.00"
Rapid release, 31 spline, for C-6 and Toploader transmissions. 1.6845" diameter. "D"=6-1/8"
Rapid release, 27 spline, for Powerglide transmissions with Dedenbear tailhousings. 1.499" diameter. "D"=5-13/16"
Rapid release, 32 spline, for Turbo 400 and Super T-10. 1.886" diameter. "D"= 5-3/4"
Rapid release, 27 spline, Powerglide or Turbo 350 transmission. 1.5035" diameter. "D" =5-13/16"
Rapid release, 30 spline, for Mopar, Doug Nash, and Liberty transmissions. 1.680" diameter. "D"= 6-1/8"
32-spline, twp splines omitted, For NASCAR applications, 1.888" diameter. "D"=6-5/16"
Rapid release, 32 spline, for roller/needle bearing tailhousings, Liberty, Jerico, and NASCAR transmissions, 1.888" diameter. "D"=6-7/16"
27 spline with one omitted spline, low profile head, for Dedenbear/Reid and Powerglide with roller/needle bearing tailhousing. 1.499" diameter, 4-5/8" barrel length. "D"= 5-13/16"
Rapid release, 32 spline, 1480 series, for Turbo 400 and Super T-10 with roller/needle bearing tailhousings. 1.886" diameter. "D"= 6.145"
1350 series, 2nd generation, steel cap kit for pinion yokes and rapid release transmission yokes (pr)
1350 series, steel caps and fasterners (pr)
