Toll Free: 1-866-508-6394
OR Contact Us
0

Off-Road Brakes

Off-Road Brakes
 

These new kits will clean up the extreme overkill of the OEM brake kit and save 160 pounds per vehicle. Designed for reducing weight (rotating and unsprung suspension) while providing precise brake control.

 

     

The MW quick change caliper design is stronger than common 6061 aluminum billet versions and utilize a rigid mount, opposing piston arrangement. Each piston retracts independently and has zero drag when released. The internal porting reduces the possibility of line damage from foreign objects. Ports with 3/8” hex bleeder screws are on both ends for easy bleeding. - No right and left 81100 4 Piston Quick Change Caliperhand calipers! Most importantly, the MW caliper features massive 7/16” oversize fasteners that reduce caliper spread at high operating pressures plus a 5/16” diameter bridge bolt for added strength. The pad features a single center bolt / bushing retaining system for easy lining replacement.

71029 14 inch steel rotor with cleaning grooves

 

The disc is 3/8” thick with a giant 14.0” diameter, which increases the braking torque compared to smaller rotor designs. The disc material is abrasive resistant, heat-treated high-carbon steel that is double-disc ground to be flat and parallel. The problems of warped or cupped discs from heat build up are removed and rotor life is extended with our exclusive Slot-Drive™ attachment system. The brake systems are designed to be compact and move the disc inboard to eliminate interference with wheels.71028 Brake Adapter / Hat

 

 

The aluminum adapters are drilled to accept 5/8” studs in 6-1/2” x 8-bolt pattern. Some kits are drilled with dual bolt circles for the original 05+ F350 hub metric pattern [170mm (6.693”) x 8-bolt] and the 6-1/2” x 8-bolt pattern.  

 

The caliper mounting brackets are made of 7075 aluminum, varying in thickness based on application requirements.

71031 Caliper Mount Bracket for F350 UB and MW Weld Cups

 

     71031 Caliper Mount Bracket for F350 & Reid Racing Knuckles

Each brake kit includes all fasteners required for assembly.

 

     
  • Weight saving of approximately 80 pounds per axle
  • Large 14” diameter disc with cleaning grooves
  • Bolt on kit for MW weld cup without other modifications for rear application

 

P/N 75910
Front Brake Kit
'78 - '91.5 Ford Kingpin Knuckles
 

P/N 75900
Front Brake Kit
05+ OEM F350 OR Reid Racing Knuckle
P/N 75905
Front Brake Kit
Ford '05 - '12 F450/550 Knuckles
 

 

P/N 75915
Front Brake Kit
'77 - '91.5 Chevy Kingpin Knuckles
 
P/N 71905
Rear Brake Kit
'73 - '99 SRW GM 14-Bolt
 
P/N 71900
Rear Brake Kit
05+ F350 Unit Bearing Hub & MW Weld Cup

 

 




352