1/2"-20 x 2" wheel studs, 12 point head (set of 10)

1/2"-20 x 3" wheel studs, 12 point head (set of 10)

12 Bolt pinion nut / washer combination

Replacement cap, billet steel, 3.062 bore case (each)

Richmond Gear, 30 spline pinion, 8620 material. 3 series carriers or MW ACG-030 case

Richmond Gear, 30 spline pinion C2-C3 Corvette, 8620 material. 3 series carriers or MW ACG-030 case

Motive Gear 3.55 Ratio, 30 spline pinion, 8620 material. 3 series carriers or MW ACG-030 case

Richmond Gear, 30 spline pinion C2-C3 Corvette, 8620 material. 3 series carriers or MW ACG-030 case

C2/C3 c-clip that can be machined to the precise thickness needed

Replace the original low carbon GM part, 4140 billet steel, heat treated and shot peened. 

Replace the original low carbon GM part, 4140 billet steel, heat treated and shot peened. 

Cross pin for C2/C3 MW Case. Uses GM 12-Bolt spider gears.   .809" diameter.

1963 - 1979 Corvette, 17 spline, 3.08 to 3.90 ratio

Upgraded replacement case for Eaton™ 19670 Posi

3" O.D. X .083" chromoly shaft with 13-7/8" centers, 4130 forged steel weld yokes, & lubed for life 1350 series u-joints. Sold as a pair.

Inner yoke shafts for C2/C3 Corvette. 300M material, heat treated and shot peened. Includes billet u-joint caps. Requires slight modification to stock posi-traction unit. (sold as a pair)

Inner yoke shafts for C2/C3 Corvette that has been converted to use a Tom's 12-Bolt Posi. 300M material, heat treated and shot peened. Includes billet u-joint caps. (Pair)

Axle flange (spindle) and splined yoke for C2/C3 ('63-'82) Corvettes. Includes Axle flange (spindle), splined universal joint yoke, Timken® bearings, SKF-CR seals, billet caps, locking nut, wheel studs, and solid preload shims. (Sold as a kit, both sides.)

30 spline, for 1350 series U joint.  "B"=2-7/8". 

Complete 4 piston front brake kit, for ´69 - ´82 Corvette or any ´68 -´ 72 Chevy passenger vehicle with disc brakes

Solid preload spacer, hardened 4140 material

30-Spline Internal Axle Gear Kit  for ACG-30 case. Or  Eaton 12 Bolt Posi-Traction unit.

1350 series, u-bolts and 12 point nuts (pr)

1350 / stock 1410 series, billet steel cap kit for threaded pinion yokes (pr)